Litaba - Litharollo tse ncha tsa Overmolding: Lisebelisoa tsa Si-TPV bakeng sa Lisebelisoa tsa Matla, Lihlahisoa tsa Bana, le Tse ling

Ntlafatsa Moralo oa Sehlahisoa sa Hau ka Si-TPV Soft Overmolded Material Comfort, Aesthetics, le Ts'ebetso.

Kemelo ea pono ea likarolo tse fapaneng tse fetelletseng, joalo kalisebelisoa tsa matla, likarolo tsa likoloi, le lisebelisoa tsa elektroniki tsa bareki tse nang le libaka tse totobalitsoeng tse bonts'ang mokhoa o bonolo, moralo o ntlafalitsoeng, le likarolo tsa ts'ebetso.

Ke Liphephetso life tse ka Sehloohong ho Fetisisa?

Overmolding ke ts'ebetso ea bohlokoa bakeng sa ho ntlafatsa ts'ebetso ea sehlahisoa le boiphihlelo ba basebelisi, empa e tla le liphephetso tsa eona. Mathata a tloaelehileng ao bahlahisi ba tobanang le 'ona a kenyelletsa:

Tšebelisano ea lintho tse bonahalang: Ho netefatsa ho khomarela ka matla pakeng tsa substrate le thepa e overmolded.

Deformation kapa Warping: Mocheso le khatello li ka etsa hore thepa e holofale kapa e sothe nakong ea ho bopa.

Matšoenyeho a ho tšoarella: Likarolo tse omeletseng li tlameha ho mamella maemo a thata joalo ka lik'hemik'hale, mocheso o feteletseng le khatello ea maikutlo.

Ho feto-fetoha ha moralo: Ho leka-lekanya ts'ebetso le ho feto-fetoha ha maemo ho ka ba ntho e qhekellang, haholo ho lijeometri tse rarahaneng.

Lisebelisoa tse Tloaelehileng tse Sebelisitsoeng ho Overmolding

Lisebelisoa tse 'maloa li sebelisoa hangata bakeng sa overmolding, e' ngoe le e 'ngoe e fana ka melemo e fapaneng ho latela ts'ebeliso:

Thermoplastic Elastomers (TPE): Li-TPE li fana ka maemo a bonolo, bonolo, le thepa e ntle ea tactile, e leng se etsang hore e be tse loketseng lihlahisoa tse hlokang matšeliso le ho ts'oara, joalo ka matshwaro le litiiso.

Thermoplastic Polyurethane (TPU): TPU e fana ka khanyetso e ntle ea abrasion, khohlano e tlase, le nako e telele e tšoarellang, hangata e sebelisetsoang likarolo tsa koloi tse fetang, lisebelisoa tsa motlakase le lisebelisoa tsa bongaka.

Silicone Rubber: E tsebahala ka botsitso ba eona bo phahameng ba mocheso, ho feto-fetoha ha maemo, le biocompatibility, silicone e atisa ho sebelisoa lihlahisoa tsa bongaka le tsa masea.

Polycarbonate (PC) le Acrylonitrile Butadiene Styrene (ABS): Lisebelisoa ka bobeli li atisa ho sebelisoa bakeng sa likarolo tse thata, tsa sebopeho tse hlokang ho ba thata empa li le bobebe.

Litharollo tse Ncha tsa Overmolding Material: Lisebelisoa tse Ncha bakeng sa Likopo tse Tsoetseng Pele tsa Overmolding

Ha bahlahisi ba ntse ba batla mekhoa ea ho ntlafatsa ts'ebetso le ho fihlela maemo a tikoloho, lisebelisoa tse ncha tsa overmolding lia hlaha ho rarolla mathata a teng:

Si-TPV (Silicone Thermoplastic Vulcanisate):Lihlahisoa tsa letoto la SILIKE's Si-TPV li sebetsana le phephetso ea ho se lumellane lipakeng tsa resin ea thermoplastic le rabara ea silicone ka tšebelisano e tsoetseng pele le mahlale a matla a vulcanization. Ts'ebetso ena e ncha e hasanya likaroloana tsa rabara tsa silicone tse senyehileng ka botlalo (1-3µm) ka mokhoa o ts'oanang ka har'a resin ea thermoplastic, ho theha sebopeho se ikhethileng sa sehlekehleke sa leoatle. Mohahong ona, resin ea thermoplastic e etsa mohato o tsoelang pele, ha rabara ea silicone e sebetsa e le karolo e qhalakaneng, e kopanyang thepa e ntle ka ho fetisisa ea thepa ka bobeli.

Ka lebaka leo, SILIKE's Si-TPV letoto la Thermoplastic Vulcanizate Elastomers e fana ka maikutlo a bonolo le a botsoalle ba letlalo, e ba etsa khetho e nepahetseng bakeng sa lits'ebetso tse fetelletseng.

Melemo eaSi-TPV Overmolding Tharollo

Ho khetha thepa e nepahetseng ea overmolding ho bohlokoa ho netefatsa ts'ebetso le ts'ebetso e tsitsitseng.Litharollo tsa Si-TPV Overmolding Materialstlhahiso:

Matla a Ntlafetseng: Si-TPV e ntlafetseng ea ho roala le ho lla e tiisa hore lihlahisoa li tšoarella nako e telele.

Tumellano e Ntle ea Tikoloho: Lintho tse kang ts'ireletso ea tikoloho le ho sebelisoa hape ha thermoplastic Silicone-based elastomer(Si-TPV)bakeng sa moruo oa selikalikoe kopana le melao ea morao-rao ea moshoelella.

Khotsofalo e Phahameng ea Basebelisi: Ha e bapisoa le PVC, boholo ba li-TPU le li-TPE tse bonolo, Si-TPV Overmolding Materials li na le silika e ikhethang, e bonolo ea letlalo ebile ha e na matheba. Ha li na li-plasticizers, li ikamahanya le li-plastiki tse thata, 'me li ka kopanngoa habonolo le lisebelisoa tse kang PC, ABS, PC / ABS, TPU, PA6, le likaroloana tse tšoanang tsa polar, tse hlahisang phihlelo e monate ea tactile ho pholletsa le mefuta e fapaneng ea lisebelisoa.

Design Flexibility: Si-TPV ke polasetiki e se nang thermoplastic elastomer e sebetsang e le thepa e ncha e fetang. E ka sebetsana le li-geometri tse rarahaneng le ho thusa bahlahisi ho rala lihlahisoa tse khahlisang ntle le ho senya ts'ebetso.

Hore na o rala lisebelisoa tsa lipapali le tsa boikhathollo, lihlahisoa tsa tlhokomelo ea motho ka mong, matla le lithulusi tsa letsoho, mohloa le lithulusi tsa jareteng, lintho tsa ho bapala, liaparo tsa mahlo, liphutheloana tsa litlolo, lisebelisoa tsa tlhokomelo ea bophelo, lisebelisoa tse aparoang ka bohlale, lisebelisoa tsa elektroniki tse nkehang, lisebelisoa tsa elektroniki tse tšoaroang ka letsoho, lisebelisoa tsa ka tlung, kapa ho feta, u hloka thepa e kopanyang polokeho, ho tenyetseha le boiketlo. Ka tharollo ea Si-TPV overmolding, tsenalisebelisoa tse ncha tse overmoldedoffer a soft touch, skin-friendly feel, and non-toxic properties, making them the ideal solution for a wide range of applications. Contact SILIKE at amy.wang@silike.cn.

Nako ea poso: Apr-25-2025